Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Jumper
    4. : Fuse box location on Citroen Jumper

Citroen Jumper - Video tutorial

Model: Citroen Jumper MK 3 - Years 2014-2023
Part: Fuse box
Operation: Fuse box location on Citroen Jumper

Sit in the driver's seat and look to your left, below: you will notice a hatch that is part of the plastic of the dashboard. Well, that hatch is the opening for the internal fuse box. The external fuse box, on the other hand, is located inside the bonnet, and more precisely on the far right (facing the passenger compartment), near the round casing relating to the air filter. In the event of an electrical fault, to find out which fuse needs to be replaced, check the diagrams in the video or on the back of the doors of the fuse boxes.


Posted on 6 January 2024 by ScegliAuto



Where are the fuses located in the Citroën Jumper?
Citroen Jumper (2014-2023 / MK 3) Every fuse of the Citroën Jumper is located inside the only fuse box installed in the vehicle: the latter is positioned in the lower left part of the
Where are the fuses located in the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) Inside the Citroën Jumper, all the fuses are contained within the appropriate fuse box, which is installed in the vehicle: it is located inside the c
Where are the fuses located in the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) All the fuses of the Citroën Jumper are contained inside the appropriate fuse box, which is installed in the vehicle: this is located in the lower le

Other guides that may interest you

    Frequently Asked Questions

    • Jumper 2006-2014 - Where are the fuses located in the Citroën Jumper? Read Answer
    • Jumper 2014-2023 - Where is the fuse box located in the Citroen Jumper? Read Answer
    • Jumper 2014-2023 - Where are the fuses of the Citroen Jumper located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos