Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the ECU on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Warning light – error code

To reset the ECU on a Citroen C3, follow this very simple procedure. Turn off the engine, pull the handbrake, and remove the key. Open the bonnet and place the support rod. At this point, locate the ECU (see video), and simply disconnect the battery by unscrewing the terminals, then disconnect all three connectors that go to the ECU itself. This will completely power down the ECU. Wait a few minutes and reconnect everything. Check that all the car's controls are functioning correctly.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2016-2023 / SY, SX) In this video we see how to change the BSI of a Citroen C3: the BSI unit centralizes and processes information from three networks: CAN HS network, w…
Citroen C3 (2009-2016 / SC) The fuse of the ECU or engine control unit, on a 2015 Citroen C3 car, is located inside the fuse box in the front hood. The fuse in question is a gre…
Citroen C3 (2016-2023 / SY, SX) The reset of the service light on the Citroen C3 vehicle follows the same procedure as resetting the light related to the maintenance of Peugeot vehi…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2016-2023 - What does the MAX warning light on Citroen C3 indicate? Read answer
    • C3 2016-2023 - How to reset the car radio of the Citroen C3? Read answer
    • C3 2009-2016 - What does the SERV warning light indicate in the Citroen C3? Read answer
    • C3 2009-2016 - What does the orange warning light mean on Citroen C3? Read answer
    • C3 2009-2016 - What does the power steering light on a Citroen C3 mean? Read answer

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos