Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C4
    4. : Removing the passenger compartment fan on Citroen C4 1

Citroen C4 - Video tutorial

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Interior blower
Operation: Removing the passenger compartment fan on Citroen C4 1

We see in this video the main instructions that will allow us to disassemble and replace the passenger compartment fan on a Citroen C4 first series. First of all we go inside the car and remove the lower clips of the passenger side carpet, which we find under the glovebox; after which we unscrew the fixing screws of the latter in order to remove it, as shown in the video. At this point we access the motor and the fan; to remove it, just unscrew its fixing screws and disconnect its electrical connector, and then replace it with the original spare part!


Posted on 14 January 2024 by ScegliAuto

    Frequently Asked Questions

    • C4 2004-2010 - How do you replace the passenger compartment fan on the Citroën C4? Read Answer
    • C4 2010-2018 - Why is the Citroen C4 fan not working? Read Answer
    • C4 2010-2018 - Why does the air conditioning of the Citroen C4 work partially? Read Answer
    • C4 2010-2018 - Why does the interior fan of the Citroen C4 stop working? Read Answer
    • C4 2020-2027 - What to do if the Citroen C4 fan does not work? Read Answer
    • C4 2004-2010 - Why is the passenger compartment fan of the Citroà «n C4 not working? Read Answer
    • C4 2010-2018 - Why is the passenger compartment fan of the Citroà «n C4 not working? Read Answer
    • C4 2004-2010 - What is the interior fan fuse on Citroen C4? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos