Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Instrument Cluster on Citroen Ds3

Model: Citroen Ds3 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Dashboard

See other generations:
Video tutorial

To remove the surface cover of the speedometer, simply insert your hands underneath and pull it towards you. At this point, extracting the speedometer will be a breeze: just unscrew the four small Torx screws located at its corners, and you can already remove it. Once this is done, while pulling out the instrument cluster, disconnect the rear connector.

Proceed in reverse until fully reassembled.

As you can see, this is a very simple operation that anyone can do, which does not necessarily require a workshop intervention.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

Dismantling the Dashboard Components of the Citroen DS3
Dismantling the Dashboard Components of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) Below are the instructions that will allow you to dismantle the dashboard components of the Citroen DS3. First, get inside the vehicle and start by r…
Removing the Radio from Citroen DS3
Removing the Radio from Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) In today's tutorial, learn how to remove the radio from a Citroen DS3 in simple steps without special tools, except for the specific removal keys for…
Removing the Door Panel of the Citroen DS3
Removing the Door Panel of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) Today's guide shows how to remove and replace the front door panel of the Citroen DS3, as well as the Citroen C3. First, open the front door and star…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos