Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When to Change the Filter on the Citroen C3 Picasso 1.4

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Air filter

How to change the air filter on the Citroen C3 Picasso? Open the front bonnet and remove the covering pieces. Locate the air filter once the engine bay is open. Unscrew the screws around the plastic covers of the filter. Remove the filter cover and extract the worn air filter. Insert a new filter into the designated housing, ensuring it fits snugly against the walls. Close the filter housing with the plastic cover and tighten the screws of the plastic covers. Close the front bonnet after maintenance.

Updated on 14 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing the Air Filter of a Citroen C3 Picasso
Replacing the Air Filter of a Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) In this video, you will find instructions on how to remove and replace the engine air filter of a Citroen C3 Picasso in simple steps. First, open the…
How to Replace the Air Filter of the Citroen C3 Picasso 2010
How to Replace the Air Filter of the Citroen C3 Picasso 2010
Citroen C3 Picasso (2008-2017 / MK 1) In this mini guide, discover how to replace the engine air filter in your Citroen C3 Picasso. First, switch off the car and fully lift the bonnet. Po…
How to Change the Cabin Air Filter on a Citroen C3 Picasso
How to Change the Cabin Air Filter on a Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Lift the bonnet and locate the compartment for the filter at the top left. To remove it, simply press on the four clips to take off the protective pa…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos