Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change for Citroen C3 Picasso

Model: Citroen C3 Picasso MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Engine oil

Video tutorial

Do you want to change the engine oil in your Citroen C3 Picasso? Let's go through the oil change process. Start by lifting the front bonnet of the car, then unscrew the engine oil filter.

Raise the car on a column lift or jack, unscrew the oil sump bolt with a socket spanner (after removing the plastic protective panel), allow the fluid to drain into a disposal container, and refit the sump bolt (unscrew the adjacent filter with a socket spanner).

Lower the car and top up the engine with new oil. Replace the air filters and complete the service.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

Reset Service Light on Citroen C3 Picasso
Reset Service Light on Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Today, you will learn how to reset the service light for the regular maintenance oil change on a Citroen C3 Picasso. First, get into the vehicle and …
How to replace the timing belt on a Citroen C3 Picasso?
How to replace the timing belt on a Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) Hello, today you will tackle the replacement of the timing belt on your Citroen C3 Picasso. Start by opening the bonnet and removing the air filter a…
How to remove the front bumper of a Citroen C3 Picasso?
How to remove the front bumper of a Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) Hello, today’s objective is to remove the front bumper of your Citroen C3 Picasso. Start by lifting the car with a jack to create enough space to wor…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos