Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil Filter on Citroen C3 Picasso

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Oil filter

How to replace the engine oil filter on a Citroen C3 Picasso? Follow this guide: Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located. Remove the air filter kit to access the filter and extract the worn oil filter, then position a new one. Lift the car on a jack and unscrew the bolt of the oil sump; allow the fluid to drain into a container. Finally, top up with new fluid and close the front bonnet.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Oil Filter on a C3 Picasso
Removing the Oil Filter on a C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Replacing the oil filter on a Citroen C3 Picasso, let’s see how to remove the filter. Open the car door and pull up the engine compartment release le…
Engine Oil Change for Citroen C3 Picasso
Engine Oil Change for Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Do you want to change the engine oil in your Citroen C3 Picasso? Let's go through the oil change process. Start by lifting the front bonnet of the ca…
How to Replace the Air Filter of the Citroen C3 Picasso 2010
How to Replace the Air Filter of the Citroen C3 Picasso 2010
Citroen C3 Picasso (2008-2017 / MK 1) In this mini guide, discover how to replace the engine air filter in your Citroen C3 Picasso. First, switch off the car and fully lift the bonnet. Po…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos