Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Oil Filter on a C3 Picasso

Model: Citroen C3 Picasso MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Oil filter

Video tutorial

Replacing the oil filter on a Citroen C3 Picasso, let’s see how to remove the filter. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it in place.

Raise the car on a jack and unscrew the bolt of the oil sump; drain the fluid into a container. Using a socket wrench, unscrew the large securing bolt of the container where the oil filter is located.

Remove the air filter kit to access the filter and extract the worn oil filter. Fit the new filter and top up with new oil.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil Filter on Citroen C3 Picasso
How to Replace the Engine Oil Filter on Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) How to replace the engine oil filter on a Citroen C3 Picasso? Follow this guide: Open the car door and pull up the engine compartment release lever l…
Engine Oil Change for Citroen C3 Picasso
Engine Oil Change for Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) Do you want to change the engine oil in your Citroen C3 Picasso? Let's go through the oil change process. Start by lifting the front bonnet of the ca…
When to Change the Filter on the Citroen C3 Picasso 1.4
Citroen C3 Picasso (2008-2017 / MK 1) How to change the air filter on the Citroen C3 Picasso? Open the front bonnet and remove the covering pieces. Locate the air filter once the engine b…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos