Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Float on the Citroën Xsara Picasso?

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Fuel pump

To access the float on the Citroën Xsara Picasso, you need to remove the rear seats along with the carpet covering the car floor. The float will be positioned immediately in front of the rear seat closure holes. To access it, you will need to cut the metal sheet that forms the vehicle floor. Once this hole is created, you will have access to the float, which can be removed after being disconnected. Depending on the needs, it can be cleaned or replaced, and then the access hole should be closed again.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …
Replacing Headlight Bulbs on Citroen Xsara Picasso
Replacing Headlight Bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the front headlight bulbs of your Xsara Picasso blown and need replacing? Here’s how to remove them. Open the front bonnet by pulling the lever l…
How to disassemble the front headlight of the Citroen Xsara Picasso
How to disassemble the front headlight of the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) These short and simple instructions will show us how to disassemble and replace the front headlight and its bulbs of the Citroen Xsara Picasso. First…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos