Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara Picasso
    4. : How to disassemble the fuel pump on Citroen Xsara Picasso

Citroen Xsara Picasso - Video tutorial

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Checks and maintenance
Operation: How to disassemble the fuel pump on Citroen Xsara Picasso

Let's see how to disassemble the floating fuel pump of a Citroen Xsara Picasso. We disconnect the battery cables, then, we remove the rear seat seat from the car (trunk). We unscrew the fastening screws of the metal cap and remove it away. We wrap the entire perimeter of the sheet with absorbent paper or cloth, then, with a screwdriver, unscrew the large bolt placed around the pump. Disconnect the power supply terminals and the liquid circulation tubes. Finally we take out the floating fuel pump. To carry out the assembly we continue backwards.


Posted on 8 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Xsara Picasso 1999-2012 - Where is the fuse box on the Citroen Xsara Picasso 1.6 HDi located? Read Answer
    • Xsara Picasso 1999-2012 - Why does the Citroà «n Xsara Picasso display not light up? Read Answer
    • Xsara Picasso 1999-2012 - Where is the Citroà «n Xsara Picasso jack located? Read Answer
    • Xsara Picasso 1999-2012 - Why does the airbag warning light come on on Citroen Xsara Picasso? Read Answer
    • Xsara Picasso 1999-2012 - What are the spies of the Citroà «n Xsara Picasso? Read Answer
    • Xsara Picasso 1999-2012 - Is it possible to connect a booster to the Citroà «n Xsara Picasso? Read Answer
    • Xsara Picasso 1999-2012 - Where does the starter connect to the Citroà «n Xsara Picasso? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos