Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Carburettor from a Citroen 2CV

Model: Citroen Citroen Various
Part: Carburetor

In this video, see the steps to detach the carburettor from the Citroen 2CV, from an engine that has already been removed from the car and needs to be disassembled into all its components. First, prepare all the necessary materials for a proper job (the carburettor tool must be A12717). Unscrew the clamp from the fuel pipe and pull the carburettor pipe. Remove the four nuts from the carburettor; the carburettor tool must be A12717 to make the job easier; with the nuts removed, you can take off the carburettor from the manifold.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the display from kilometers to miles on a Citroen vehicle
How to set the display from kilometers to miles on a Citroen vehicle
Citroen Citroen Various Today we will explain how simple and quick it is to replace the display of kilometers with miles on a Citroen vehicle. To perform this operation, we …
How do you replace the headlight bulb in a Citroen Dispatch?
How do you replace the headlight bulb in a Citroen Dispatch?
Citroen Citroen Various The Citroen Dispatch is a work vehicle, specifically a van, which has the same technique for replacing the headlight bulb as shown in this video, car…
How to Remove the Gear Knob on a Peugeot or Citroen
How to Remove the Gear Knob on a Peugeot or Citroen
Citroen Citroen Various Sometimes, the gear knob may break or you may simply want to replace it with a different one. Here’s how to proceed when this happens on a Peugeot or…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos