Do it yourself
| ||||
|
Citroen C4 Picasso - Video tutorial
Model: Citroen C4 Picasso
MK 2
- Years 2013-2022 If the remote control of our Citroen C4 does not work anymore, it could be that the battery is flat or damaged. To carry out the replacement, open the plastic cover of the key to get to the battery. In particular we take the remote control key C4 and press the button to trigger the metal key. We find the precise point where to pry to remove the flap. We hold the remote control key with one hand, with the other we insert a lever kit on the side of the cover where the metal key is housed. We pry up to detach the plastic cap that covers the back of the key. Here we will find the battery to replace, that is a 3V Cr 2032 flat type. Now remove the flat battery with a mini screwdriver and place the new 3V Cr 2032 battery (best of excellent quality for a longer duration). Finally we close the remote control key with the cover cap (press until it locks in the plastic) and press the plastic after having positioned them perfectly. To be sure we have done everything correctly, we test the operation of the remote control by opening and closing the car doors.
Posted on 19 March 2024 by ScegliAuto
How to replace the key battery of the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) As a first operation it will obviously be necessary to extract the physical part of your key to be able to do so, just press the button located under
How to replace the key battery of the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) In this new mini guide we will explain how to replace the button cell inside the smart key of the Citroen C4 Picasso Mk2 in a few simple steps. First
Replacement of the battery of the key / remote control of the Citroen C4 Picasso.
Citroen C4 Picasso (2013-2022 / MK 2) To replace the battery of the key / remote control of the Citroen C4 Picasso, let's start, after having obtained the new battery and a small screwdri Other guides that may interest you
|
Frequently Asked QuestionsHow do I replace the Land Rover Evoque auxiliary battery?In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.079
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |