Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Top Up AdBlue and Reset Warning Light on Citroen Jumper

Model: Citroen Jumper MK 1 - Years 1994-2006
Part: Warning light – error code

When the engine warning light comes on in a Citroen Jumper or Peugeot vehicle, you may need to top up the AdBlue tank, an additive that cleans the catalytic converter. An AdBlue kit available online costs around £150. Attach the hose to the AdBlue container and connect it to the blue tube of the tank located on the side underneath the vehicle, as shown in the video. To remove the tank, simply unscrew the three 13mm bolts that secure it and disconnect the connector. When the first drops of liquid come out of the upper tap, it means the tank is full.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

What Does the AdBlue Warning Light Indicate on the 2023 Citroën Jumper?
What Does the AdBlue Warning Light Indicate on the 2023 Citroën Jumper?
Citroen Jumper (2014-2024 / MK 3) AdBlue fluid is used in vehicles to reduce harmful and polluting nitrogen oxide emissions from combustion. Given the requirement for its use in diese…
How to Reset the AdBlue Warning Light on a Citroën Jumper?
How to Reset the AdBlue Warning Light on a Citroën Jumper?
Citroen Jumper (2014-2024 / MK 3) To reset the AdBlue warning light on a Citroën Jumper, you need to top up the system with the necessary amount of additive fluid. To do this, open th…
How to Reset the AdBlue Warning Light on the Citroen Jumper
How to Reset the AdBlue Warning Light on the Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) If the AdBlue warning light illuminates on this vehicle model, the following description provides simple steps to remove the warning. The illuminated…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos