Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Glow Plugs on the Citroen Berlingo 1.9

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Glow plugs

In this guide, find the instructions for removing and replacing the glow plugs on the Citroen Berlingo in simple steps. First, open the bonnet of your car and start by removing the intake hose by unscrewing the clamp screw; then disconnect the four electrical connectors from the glow plugs. Use a socket wrench with an extension to unscrew and remove them, as shown in the video. Now replace the old glow plugs with new ones of the correct type and thread; screw them in by hand and then tighten with a spanner!

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the External Wing Mirror from a Citroen Berlingo
How to Remove the External Wing Mirror from a Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Before you can start, open the front door of your Citroen Berlingo. Start by unfastening and removing the inner cover located near the wing mirror. B…
Replacing Front Headlight Bulbs on Citroen Berlingo
Replacing Front Headlight Bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Replace the blown bulbs in the front lights of your Citroen Berlingo. Start by opening the front bonnet and removing the plastic cover (if fitted beh…
How to Reset the Service Interval on the Citroen Berlingo
How to Reset the Service Interval on the Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) On the Citroen Berlingo, the maintenance interval reset is performed with the engine off. With the Citroen Berlingo stationary, press and hold the "0…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos