Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing Rear Headlight Bulb

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Tail light bulb

This video demonstrates how to remove and replace the rear headlight bulb of your car. First, remove the rear light; unscrew the screw located outside the light, covered by a small red plastic cap, then unscrew the inner screw that is easily accessible from the boot. Once the screws are removed, pull the light out carefully, being mindful of the connectors still attached. Finally, detach the red part of the stop light by releasing the retaining clips; once removed, proceed to replace the bulb.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Citroën C3?
How to Replace the Rear Light Bulb on a Citroën C3?
Citroen C3 (2016-2023 / SY, SX) To replace the rear light bulb on a Citroën C3, open the tailgate to access the side of the boot corresponding to the bulb to be replaced. Under the …
Replacing Rear Headlight Bulbs on a Citroen C3
Replacing Rear Headlight Bulbs on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) In today's video, you will learn how to remove and replace the rear headlight bulbs on a Citroen C3 by following these simple instructions. First, op…
How to replace the rear headlight bulb of the Citroen C3
How to replace the rear headlight bulb of the Citroen C3
Citroen C3 (2009-2016 / SC) Replacing the rear headlight bulb of the Citroen C3 is a simple and quick operation to be carried out independently. To perform the replacement of th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos