Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Gear Shift Cables on the Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Transmission

To replace the gear shift cables on the vehicle, follow this tutorial and refer to the video. First, lift the vehicle on a ramp, remove the gaiter from the gear lever located on the centre tunnel, and locate the cable connections. Move under the vehicle and identify the two cables that exit the chassis to reach the gearbox. Disconnect and detach the cables from the gearbox. Return to the cabin and start pulling the gear cables towards you to detach the cable pass-through from the cabin to the underbody, and proceed to completely remove them. Then, pass the new cables through the pass-through and attach them to the gearbox and the lever.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the gear selector cables on a Citroën C3?
Citroen C3 (2002-2009 / FC, FN) To replace the gear selector cables on a Citroën C3, lift the gear gaiter and remove the corresponding knob. This will allow you to detach the clips …
How do you replace the gear shift knob in the Citroen C3?
How do you replace the gear shift knob in the Citroen C3?
Citroen C3 (2009-2016 / SC) As strange as it may seem, even the gear shift knob of a car's manual transmission wears out over time, even to the point of breaking, as shown in th…
How to Replace the Gear Knob on a Citroen C3
How to Replace the Gear Knob on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) To replace the gear knob on a Citroen C3, follow this procedure: first, detach the plastic around the gear lever, then pull upwards to reach the clip…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos