Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the fuse diagram for the Citroen C3?

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Fuse box

In this video, we can see the fuse diagram for the first series Citroen C3, useful if a device in the car stops working and you need to check its corresponding fuse. As we can see, this Citroen C3 model has two fuse boxes: one located in the engine compartment, to the right of the battery covered by a plastic cover, and the other located inside the cabin, at the bottom left of the steering wheel accessible from the designated door. Remember to replace fuses with equivalent amperage spares and to use the supplied pliers.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Layout and positioning of the external fuses of the Citroen C3 1.2
Layout and positioning of the external fuses of the Citroen C3 1.2
Citroen C3 (2009-2016 / SC) Today's guide will show us how to access the external fuse box of the Citroen C3, also finding the fuse diagram and chart. First, let's open the car'…
Position and diagram of the external fuses of the Citroen C3 1.4 HDI
Position and diagram of the external fuses of the Citroen C3 1.4 HDI
Citroen C3 (2002-2009 / FC, FN) Today we will see the instructions regarding the positioning and the diagram of the external fuse box of the Citroen C3 1.4 HDI. First of all, we ope…
Diagram and positioning of the fuse boxes of the Citroen C3.
Diagram and positioning of the fuse boxes of the Citroen C3.
Citroen C3 (2016-2023 / SY, SX) Today we will see the information related to the layout and positioning of the fuse boxes of the Citroen C3. First, we get on board the car and start…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2009-2016 - Where is the petrol pump relay located in the Citroen C3? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos