Do it yourself
Frequently asked questions about cars and motorcycles

Preparation and Reassembly of the Head Gasket and Cylinder Head

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Cylinder head

Before proceeding with the reassembly of the cylinder head, check with a feeler gauge and a bar that the two surfaces (the head and the block where the pistons are) are perfectly flat. Screw in the two plates to secure the cylinders. Then, use a tap to clean the screw holes and blow out any debris with compressed air. Insert the bushes, rotate the crankshaft to align the cylinders, and remove the plates. Position the gasket and then the cylinder head. Apply thread sealant to each screw and tighten them according to the manufacturer's specifications. Car model: Citroen C4 16V

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C4 (2004-2010 / MK 1) After engine regeneration, during reassembly, it is important to replace the cylinder head fixing pins along with gaskets and oil seals, as they are …
Citroen C4 (2004-2010 / MK 1) The gasket kit for engine regeneration always includes the rocker cover gasket; in this case, the vehicle has two covers and two gaskets. After thoro…
Citroen C4 (2004-2010 / MK 1) As usual, check the flatness of the surface. Now, using the appropriate tool, remove the valve and replace the valve guide ring. This operation shoul…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos