Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Rear Light of the Citroen C4 MK1

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Tail light

In this guide, you will learn how to dismantle the rear light and replace the bulbs of the Citroen C4 first series in simple and quick steps. First, open the boot and start by removing the plastic clips from the carpeted side trim; then unscrew the plastic screw of the light to remove it from the outside, as shown in the video. At this point, disconnect the electrical connectors of the bulbs, removing them along with their holders; if necessary, replace the bulbs and the rear light. Finally, reassemble everything!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Wiper Blade on a Citroen C4
How to Remove the Rear Wiper Blade on a Citroen C4
Citroen C4 (2004-2010 / MK 1) Before starting, exit the cabin of your Citroen C4 and head to the rear hatch. Begin by lifting the rear wiper arm and rotate the blade until it is p…
How to Replace the Brake Light Bulb of a Citroen C4 Rear Headlamp
How to Replace the Brake Light Bulb of a Citroen C4 Rear Headlamp
Citroen C4 (2004-2010 / MK 1) Before you begin, open the boot of your Citroen C4. Start by unclipping and moving the internal side cover of the boot. Next, unscrew and remove the …
How to Replace the Third Brake Light on a Citroen C4
How to Replace the Third Brake Light on a Citroen C4
Citroen C4 (2004-2010 / MK 1) Before starting, open the tailgate of your Citroen C4. Begin by unscrewing and removing the internal bolts that secure the third brake light. Then, u…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos