Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. Saxo
  6. : Camshaft oil seal replacement

Citroen Saxo - Video tutorial

Model: Citroen Saxo MK 1 - Years 1996-2004
Part: Engine
Operation: Camshaft oil seal replacement

Before inserting the new oil seals in the relative seat of the camshafts, make sure that there are no residues of dirt, lubricate both the seat and the oil seal and insert them by pressing them up to the stop with a pad. At this point, install the timing pulleys and tighten the central fixing pin; align the timing references, lock the pulleys of both the camshafts and the crankshaft with the appropriate pins and install the timing belt. After installing the belt, rotate the crankshaft twice and check the alignment of the timing references again.


Posted on 5 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Saxo 1996-2004 - How much does it cost to replace the engine in the Citroen Saxo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos