Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Saxo
    4. : Assembly of cups, camshafts and belt

Citroen Saxo - Video tutorial

Model: Citroen Saxo MK 1 - Years 1996-2004
Part: Engine
Operation: Assembly of cups, camshafts and belt

First sprinkle the valve seats as well as the cups with a little oil and place them one by one in their seats. Lubricate with special oil and insert the camshafts always lubricating the support points. Spread a string of gasket paste on the edge and position the upper casing. Tighten the screws in the proper sequence and strength. Now insert the rubber rings where the camshafts come out of the crankcase and then mount the two toothed pulleys. By locking the two toothed pulleys with the appropriate pins, you can also reassemble the toothed belt. Car model: Citroen Saxo


Posted on 5 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Saxo 1996-2004 - How much does it cost to replace the engine in the Citroen Saxo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos