Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Exhaust Manifold Gasket

Model: Citroen Saxo MK 1 - Years 1996-2004
Part: Engine

Before applying the new gasket, clean the gasket seating thoroughly, both on the cylinder head side and the manifold side; it is essential to remove any dirt and deposits that could affect the gasket's adherence and sealing, potentially leading to noise and a loss of engine performance. Once cleaning is complete, align the new gasket with the dowel pins and fit the manifold by tightening the fixing nuts with a torque wrench in a cross pattern.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Intake Manifold Gasket
Replacing the Intake Manifold Gasket
Citroen Saxo (1996-2004 / MK 1) The intake manifold gaskets are four rings that must be properly seated in their respective grooves corresponding to the intake ducts; once the new g…
Replacing the Cylinder Head Gasket
Replacing the Cylinder Head Gasket
Citroen Saxo (1996-2004 / MK 1) If you experience overheating issues in the engine cooling system and find traces of oil inside the radiator, the cylinder head gasket has likely fai…
Maintenance of Valve Stem Seal
Maintenance of Valve Stem Seal
Citroen Saxo (1996-2004 / MK 1) Replacing the valve stem seals is a task that requires some mechanical and maintenance knowledge. Each seal, whether right or left, is replaced in th…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos