Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cylinder Head Gasket

Model: Citroen Saxo MK 1 - Years 1996-2004
Part: Cylinder head

If you experience overheating issues in the engine cooling system and find traces of oil inside the radiator, the cylinder head gasket has likely failed. To replace it, first drain the cooling system and then remove the radiator, exhaust manifold, and intake manifold along with the injection system. Disconnect the auxiliary belt, align the timing belt references, and remove it to free the camshaft pulley. Take off the rocker cover and then the fixing bolts of the cylinder head. Clean the cylinder block, have the cylinder head checked by a specialist workshop, apply the new gasket, and reassemble in reverse order, paying attention to the tightening sequence of the head bolts. Finally, refill the cooling system with the appropriate fluid, start the engine, allow it to reach operating temperature, and ensure it remains stable.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cylinder Head Gasket on a Citroen Saxo
How to Replace the Cylinder Head Gasket on a Citroen Saxo
Citroen Saxo (1996-2004 / MK 1) In this tutorial, follow the main steps to remove and replace the cylinder head gasket on a Citroen Saxo. First, open the bonnet of your car and star…
How to Remove the Cylinder Head on a Citroen Saxo
How to Remove the Cylinder Head on a Citroen Saxo
Citroen Saxo (1996-2004 / MK 1) Learn how to remove the engine cylinder head on a Citroen Saxo. First, remove the plastic soundproofing panel on the engine head and slide out the oi…
Replacing the Exhaust Manifold Gasket
Replacing the Exhaust Manifold Gasket
Citroen Saxo (1996-2004 / MK 1) Before applying the new gasket, clean the gasket seating thoroughly, both on the cylinder head side and the manifold side; it is essential to remove …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos