Do it yourself
Frequently asked questions about cars and motorcycles

Halfshaft Replacement Instructions

Model: Citroen Saxo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Drivetrain

Video tutorial

The halfshaft is a component of the drivetrain, which is the set of mechanisms that transmit the energy developed by the engine to the wheels. Front-wheel-drive cars, to allow the driving wheels to steer, are equipped with constant velocity joints protected by rubber boots.

To replace the halfshaft, it is advisable to lift the vehicle (preferably on a ramp) and remove the front wheel; detach the ball joint of the suspension arm (use a fork puller or a lever rather than a hammer), disconnect the anti-roll bar from the suspension arm and the halfshaft nut from the hub to extract it first from the wheel side and then from the gearbox side (some oil may leak out). Then insert the new halfshaft, this time first from the gearbox side and then from the wheel side, tighten the hub nut, making a security indent with a chisel to prevent it from accidentally loosening, and reassemble the suspension arm ball joint and the anti-roll bar. Check the gearbox oil level.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Citroen Saxo (1996-2004 / MK 1) To keep your car in perfect working order, regular maintenance is essential. This includes the valve stem seals. With a bit of mechanical knowledge, …
Citroen Saxo (1996-2004 / MK 1) Replacing the rear brake shoes has its challenges, particularly reattaching the springs, but with the right tools and some tips, it can be done; star…
Citroen Saxo (1996-2004 / MK 1) To replace the windscreen washer pump, it is recommended to lift the vehicle on a ramp or suitable axle stands and remove the front right wheel, as t…

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos