Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How do you change the coolant of the Citroà «n C3?

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Antifreeze liquid
Operation: How do you change the coolant of the Citroà «n C3?

In order to replace the coolant of the Citroà «n C3 you have to open the hood, so that you have access to the components that are inside the engine compartment: on the right side of the latter, between the engine block and the air filter, you can identify the tube that allows the passage of the coolant. This pipe must be disconnected in order to allow the antifreeze liquid to flow into a suitably positioned container. After it has completely leaked, the hose must be reconnected and topped up from the vent indicated with the special symbol.


Posted on 9 November 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C3 2009-2016 - How much coolant does the Citroen C3 contain? Read Answer
    • C3 2009-2016 - How many liters of coolant does the Citroen C3 contain? Read Answer
    • C3 2016-2023 - How to replace the radiator fluid in the Citroen C3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos