Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Berlingo
    4. : How to reset the service on the Citroen Berlingo Adblue

Citroen Berlingo - Video tutorial

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: -board computer
Operation: How to reset the service on the Citroen Berlingo Adblue

In this video we will show you how to reset the service on the Citroen Berlingo Adblue. First you need to connect a diagnostic device to your car. You can use an OBD2 and connect it to the appropriate socket which is generally located near the underside of the steering wheel (see the vehicle's instruction booklet). Then download the appropriate diagnostic application to your mobile phone (tablet or laptop). Once this is done, look for the configuration of your device among the bluetooth connections and create the connection. Once connected, start the engine and accelerate so that the various service parameters begin to appear on the display. At this point, all you have to do is reset.


Posted on 18 November 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Berlingo 2008-2018 - Where is the fan fuse located on the second generation Citroen Berlingo? Read Answer
    • Berlingo 2018-2028 - What does the urea warning light on the Citroen Berlingo indicate? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos