Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Jumper
    4. : How to reset the oil light on Citroen Jumper 2

Citroen Jumper - Video tutorial

Model: Citroen Jumper MK 2 - Years 2006-2014
Part: Instrument cluster
Operation: How to reset the oil light on Citroen Jumper 2

In this new mini guide dedicated to your Citroen Jumper second series (year 2006-2014) we are going to find out together how to reset the engine oil warning light correctly. First, go inside the vehicle, reach the driver's side and make sure the ignition is off. Immediately afterwards hold down the brake and accelerator pedals simultaneously and start the ignition. Wait about 20 seconds then release the pedals and switch off the ignition. After a minute, restart the instrument panel and the light reset procedure is finally successful.


Posted on 1 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Jumper 2006-2014 - Where can the meaning of the Citroen Jumper 2 warning lights be found? Read Answer
    • Jumper 2014-2023 - What to do when the Adblue light comes on on your Citroen Jumper? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos