Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Decarbonise the EGR Valve of the Citroen Jumper

Model: Citroen Jumper MK 2 - Years 2006-2014
Part: EGR valve

In this video, see how to easily access the EGR valve of the Citroen Jumper (also applicable to the Fiat Ducato or Peugeot Boxer, as the procedure is essentially the same). To do a proper job, you must also remove and clean the electronic module, which is equally dirty and needs to be cleaned. The method recommended by our YouTuber, which will restore the parts to near new condition as shown in the video, is to soak them for at least three days in a suitable product. We recommend the Arexons EGR valve cleaner if you prefer a spray, available on Amazon with code B01FY0IDDQ, priced at £14.00 including delivery. If you prefer a liquid product, we suggest Bardahl, which costs £21.16 including delivery, also on Amazon with code B019J2ACA2.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the EGR valve of the Citroën Jumper?
How do you replace the EGR valve of the Citroën Jumper?
Citroen Jumper (2014-2024 / MK 3) It will be possible to replace the EGR valve of the Citroën Jumper by opening the hood in order to access the components in the engine compartment: h…
How to Bleed the Clutch on a Citroen Jumper
How to Bleed the Clutch on a Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) To bleed the clutch on a Citroen Jumper, open the bleed nipple on the slave cylinder and remove the retaining clip indicated in the video. Slowly pre…
Where is the OBD2 port located on the Citroen Jumper?
Where is the OBD2 port located on the Citroen Jumper?
Citroen Jumper (2006-2014 / MK 2) If you are curious to find out where the OBD2 port is located in your Citroen Jumper, all you need to do is carefully read the steps described in the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos