Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the EGR valve of the Citroën Jumper?

Model: Citroen Jumper MK 3 - Years 2014-2024
Part: EGR valve

It will be possible to replace the EGR valve of the Citroën Jumper by opening the hood in order to access the components in the engine compartment: here it will be possible to locate the valve at the rear of the engine block, immediately under the exhaust manifold. It will be possible to proceed with the removal of the valve by loosening the screws that hold it to the manifold and the remaining part of the duct: once the screws have been removed, it will be possible to proceed by disconnecting the power cables and inserting the new valve. The latter can now be fixed by verifying that everything is functioning correctly.

Posted on 28 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Decarbonise the EGR Valve of the Citroen Jumper
How to Decarbonise the EGR Valve of the Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) In this video, see how to easily access the EGR valve of the Citroen Jumper (also applicable to the Fiat Ducato or Peugeot Boxer, as the procedure is…
Where are the fuses on board the Citroen Jumper 2?
Where are the fuses on board the Citroen Jumper 2?
Citroen Jumper (2006-2014 / MK 2) The fuses located on board the Citroen Jumper van model 2, which was produced between 2006 and 2014, are situated in a easily accessible position for…
Where is the OBD2 port located on the Citroen Jumper?
Where is the OBD2 port located on the Citroen Jumper?
Citroen Jumper (2006-2014 / MK 2) If you are curious to find out where the OBD2 port is located in your Citroen Jumper, all you need to do is carefully read the steps described in the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos