Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : Disassembly of the water pump of the Citroen C3 1.4 HDI.

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Pump
Operation: Disassembly of the water pump of the Citroen C3 1.4 HDI.

In this guide, we will see the main instructions useful for disassembling and replacing the water pump of the Citroen C3 1.4 HDI. First, we lift the car and remove the right front wheel; we remove the fender and disconnect the serpentine belt, loosening the tensioner, as shown in the video. At this point, we remove the crankshaft pulley by unscrewing the central bolt; then we drain the coolant, subsequently removing the timing belt to remove the water pump, following the video tutorial until the end for replacement!


Posted on 3 May 2023 by ScegliAuto

    Frequently Asked Questions

    • C3 2009-2016 - What problems does the Citroen C3 have on diesel pressure? Read Answer
    • C3 2009-2016 - Anti-pollution system anomaly on CitroenC3 petrol? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos