Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to replace the air filter of Citroen C3 2.

Citroen C3 - Video tutorial

Model: Citroen C3 SC - Years 2009-2016
Part: Air filter
Operation: How to replace the air filter of Citroen C3 2.

In the following guide dedicated to your Citroen C3 Mk2, we will discover how to replace the engine air filter. This is a very important component that allows both the reliability and efficiency of the engine to be maintained optimally. First, you need to turn off the car and let it cool down sufficiently. Then unlock the front hood and lift it completely. Once you have done this, locate the filter box near the battery and disconnect the electrical pin. At this point, unscrew all the various cover screws and remove it. Finally, replace the used filter with the new one.


Posted on 11 June 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C3 2009-2016 - Where is the air filter located in the Citroen C3? Read Answer
    • C3 2009-2016 - When to replace the air filter on Citroen C3? Read Answer
    • C3 2002-2009 - Why does the Citroen C3 not keep the minimum? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos