Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Service Light on the Citroen DS3

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: Service warning light

Briefly, here are the instructions to reset the service light for the routine maintenance oil change on the Citroen DS3. First, get in the vehicle and press and hold the button located on the right side of the instrument cluster; then turn the ignition on by turning the key to position one, waiting for the countdown to finish that appears on the small display of the instrument cluster, as shown in the video. At this point, the maintenance key will be reset from the display, turn off the instrument cluster, and finally start the engine!

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Citroen DS3
How to reset the service light on the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) The service light reset of the Citroen DS3 is a very simple operation to perform independently. We remind you to perform this operation only after co…
How to replace the battery of the Citroen DS3 key
How to replace the battery of the Citroen DS3 key
Citroen Ds3 (2010-2019 / MK 1) To carry out the replacement of the battery located in the key of your Citroen DS3, you only need a new CR2032 battery and a flat screwdriver prefera…
How to replace the front headlight bulb of the Citroen DS3
How to replace the front headlight bulb of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) If one of the bulbs in the front headlight of your Citroen DS3 has suddenly stopped working and you want to find out how to replace it correctly, the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos