Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Citroën C3?

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Timing belt

To replace the timing belt on a Citroën C3, open the bonnet to access the components on the left side of the engine bay, where the belt is located. Remove the belt from its housing by loosening the central nuts on the pulleys. To access the lower pulleys, loosen the nuts securing the corresponding front wheel, removing it along with its wheel arch liner. This will allow you to remove the old belt and replace it with a new spare part.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How and When to Change the Timing Belt on a Citroen C3 1.6 HDI
How and When to Change the Timing Belt on a Citroen C3 1.6 HDI
Citroen C3 (2002-2009 / FC, FN) This guide outlines the steps to remove and replace the timing belt on a Citroen C3 1.6 HDI. Remember, the timing belt should be replaced every 112,0…
Guide to Replacing the Timing Belt on the Citroen C3 1.2 Puretech
Guide to Replacing the Timing Belt on the Citroen C3 1.2 Puretech
Citroen C3 (2016-2023 / SY, SX) Today we will look at the useful instructions for removing and replacing the timing belt on the Citroen C3 1.2 Puretech; the timing belt replacement …
How to Replace the Timing Belt on the Citroen C3
How to Replace the Timing Belt on the Citroen C3
Citroen C3 (2002-2009 / FC, FN) In today's video, you will learn how to replace the timing belt on the Citroen C3. First, position the car on a lift to raise the vehicle and work co…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos