Do it yourself
| ||||
|
Citroen Xsara Picasso - Video tutorial
Model: Citroen Xsara Picasso
MK 1
- Years 1999-2012 Despite there being only one official model of Citroen Xsara Picasso, the fuse layout is not the same for all cars in this line. In fact, it changes depending on the year of production and there may be small differences between one year and another. The YouTuber who made this video shows us the fuse layout for the Citroen Xsara Picasso produced between 2005 and 2010, also indicating exactly where the two fuse boxes are located (one in the engine compartment and one under the plastics in the cabin), the amperage, the number, and the function of each fuse.
Posted on 26 October 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsReplace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.053
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |