Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the clock on the Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Clock

To set the clock on the Citroen Berlingo, start by turning on the instrument panel without starting the vehicle's engine. Press the button on the left of the speedometer to display the time along with the vehicle's total mileage; once the time appears, hold down the button on the right of the rev counter until the hour starts to flash. When the hour is flashing, press the button on the right of the rev counter until the desired hour is set, then confirm and move to the minutes using the button on the left of the speedometer (these will also flash); now press the button on the right of the rev counter until the desired minutes are set (to speed this up, you can hold down the same button); finally, press the button on the left of the speedometer to confirm the set time.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time in a Citroen Berlingo
How to Set the Time in a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this video, you will learn how to set the time in a Citroen Berlingo. Focus on the control section located at the centre of the dashboard between …
How to Set the Clock on a Citroën Berlingo?
How to Set the Clock on a Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) To adjust the clock on the Citroën Berlingo, turn the ignition key in the ignition barrel to switch on the instrument panel. Once the panel is on, pr…
How to Set the Time and Date on the Citroen Berlingo
How to Set the Time and Date on the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Discover in this video the instructions to adjust the date and time on the Citroen Berlingo. First, get inside the vehicle and turn the ignition key …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos