Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Ds5
    4. : Service reset on Citroen DS5

Citroen Ds5 - Video tutorial

Model: Citroen Ds5 MK 1 - Years 2011-2019
Part: Checks and maintenance
Operation: Service reset on Citroen DS5

We can see through this very short and useful video guide today the necessary procedure to reset the service light on a Citroen DS5. This is a very simple operation to do and we can do it completely independently and in just a few seconds after changing the vehicle's engine oil, but let's see how to proceed immediately. First, we need to press and hold the "000" button with the wrench icon on the right side of the speedometer and then turn on the vehicle's ignition without starting the engine. Once this is done, we will see a countdown of ten seconds on the information display, so we continue to hold down the "000" button until the time expires to perform and complete the reset.


Posted on 14 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Ds5 2011-2019 - What does the Citroën DS5 Urea light indicate? Read Answer
    • Ds5 2011-2019 - What does the urea warning light indicate in the Citroà «n DS5? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos