Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Citroën Jumper?

Model: Citroen Jumper MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on the Citroën Jumper, turn the ignition key to switch on the instrument panel and check that the light is illuminated. Once confirmed, switch off the instrument panel and simultaneously press the brake and accelerator pedals.

While keeping both pedals pressed, turn the ignition key to switch on the instrument panel. After the panel is on, continue holding the pedals for about another fifteen seconds; finally, switch off and then back on the instrument panel to verify that the light is off.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Citroën Jumper
How to Reset the Service Light on a Citroën Jumper
Citroen Jumper (2006-2014 / MK 2) To reset the Service light on a Citroën Jumper, turn on the ignition without starting the vehicle. Then, press the accelerator pedal and simultaneous…
How to Reset the Service Light on the Citroën Jumper?
How to Reset the Service Light on the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) To reset the Service light on the Citroën Jumper, turn on the instrument cluster without starting the vehicle; then, press the accelerator pedal and …
How to reset the Service light in the Citroën Jumper?
How to reset the Service light in the Citroën Jumper?
Citroen Jumper (2014-2024 / MK 3) In the Citroën Jumper, to reset the Service light, turn on the instrument cluster without starting the vehicle; then, press the accelerator pedal whi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos