Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C5 Aircross
    4. : Resetting the Citroen C5 Aircross MK2 Service light

Citroen C5 Aircross - Video tutorial

Model: Citroen C5 Aircross MK 2 - Years 2022-2024
Part: Checks and maintenance
Operation: Resetting the Citroen C5 Aircross MK2 Service light

In this video we see how a reminder appears in the center of the instrument panel to notify us that we are reaching the mileage set for the engine oil change of the Citroen C5 Aircross. After replacing the lubricant fluid and its filter, we proceed with resetting the notification system. Sitting in the driver's seat, we press and hold the "000/check" button in the center of the dashboard, above the steering column. We will see a countdown from ten to zero start on the display, after which a confirmation message will appear. We turn off the instrument panel to complete the operation.


Posted on 7 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C5 Aircross 2017-2022 - Has the Citroen C5 Aircross shown any problems in the past? Read Answer
    • C5 Aircross 2017-2022 - What are the problems with the C5 Aircross? Read Answer
    • C5 Aircross 2017-2022 - How much is the coupon for the Citroen C5 Aircross? Read Answer
    • C5 Aircross 2017-2022 - What problems does AdBlue have on Citroen C5 Aircross? Read Answer
    • C5 Aircross 2017-2022 - When should the Citroen C5 Aircross be serviced? Read Answer
    • C5 Aircross 2017-2022 - How many km do you have to service the Citroà «n C5 Aircross? Read Answer
    • C5 Aircross 2017-2022 - How much does the first service cost for the Citroen C5 Aircross? Read Answer
    • C5 Aircross 2017-2022 - How often does a Citroen C5 Aircross have to be serviced? Read Answer
    • C5 Aircross 2017-2022 - When to do the first service on the Citroen C5 Aircross? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos