Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on the Citroën Xsara Picasso?

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Shift knob

Video tutorial

To replace the gear knob on the Citroën Xsara Picasso, use a tool to pry up the clips located at the bottom of the leather cover on the lever. Once lifted, remove the clip connecting it to the knob, allowing the knob to detach from the lever along with the gaiter.

After removing these two components, fit the new gaiter around the lever and then the knob, securing it properly and checking that everything works correctly.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

How to Remove the Gear Knob from Citroen Xsara Picasso
How to Remove the Gear Knob from Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) The video describes how to remove the gear knob from the Citroen Xsara Picasso. This is a simple task that does not require special skills. First, lo…
Replacement of the knob and boot of the Citroen Xsara Picasso gear lever.
Citroen Xsara Picasso (1999-2012 / MK 1) These short and simple instructions will show us how to disassemble and replace the knob and the gear lever gaiter of the Citroen Xsara Picasso. Firs…
How to Remove the Gear Knob on Citroen Xsara Picasso
How to Remove the Gear Knob on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Replace the damaged gear knob on a Citroen Xsara Picasso: first, take the knob in your hands and rotate it left and right until it comes off the gear…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos