Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin fan of the Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Blower motor

In this brief and simple guide, we will see the instructions that will allow us to disassemble and replace the cabin fan for the air conditioning of the Citroen C4 Picasso. First of all, we get on board the vehicle, front passenger side, and start removing the plastic cover found at the bottom right; then we unscrew the fixing screws of the cabin fan, disconnecting the power connector to remove it, as shown in the video. At this point, we install or repair the cabin fan, finally testing its operation at various speeds!

Posted on 20 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Cabin Fan from a Citroen C4 Grand Picasso
Removing the Cabin Fan from a Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) This guide outlines the main steps for removing and replacing the cabin fan in the Citroen C4 Picasso and Grand Picasso. First, get into the vehicle …
How do you replace the cabin fan of the Citroën C4 Picasso?
How do you replace the cabin fan of the Citroën C4 Picasso?
Citroen C4 Picasso (2013-2022 / MK 2) The cabin fan installed on board the Citroën C4 Picasso can be replaced by removing the carpet under the glove compartment on the passenger side, als…
How to Replace the Cabin Fan on a Citroën C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) To replace the cabin fan on a Citroën C4 Picasso, first remove the carpet located under the glove compartment on the passenger side, along with the l…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos