Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear seat of a Citroen Xsara Picasso?

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Seat

To remove the rear seat of a Citroen Xsara Picasso, first, move the seat to the most forward position possible. Find the release levers on the bottom side of the seat and actuate them to flip the seat cushion upwards. Once the cushion is lifted, locate the screws securing the seat to the vehicle structure and remove them using an appropriate key. Next, slide the seat backwards to release the locking hooks in the front. Lift the seat upwards to completely detach it from its position. Make sure to pay attention to any electrical connections or wiring that may be present under the seat. Disconnect them carefully, if necessary, to avoid damage. Once the seat is removed, you can perform any necessary repairs or maintenance.

Posted on 29 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Seats on the Citroen Xsara Picasso
Removing the Rear Seats on the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this video tutorial, see how to remove the rear seats on the Citroen Xsara Picasso in simple and quick steps. First, open the rear doors of your c…
How to Remove the Ignition Switch on a Citroen Xsara Picasso
How to Remove the Ignition Switch on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this tutorial, see how to remove the ignition switch on a Citroen Xsara Picasso. First, disconnect the negative terminal of the battery, then unsc…
How to Remove the Heater Fan Resistor on a Citroen Xsara Picasso
How to Remove the Heater Fan Resistor on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the front passenger seat of your Citroen Xsara Picasso. Start by removing the glove compartment by unscrewing the relevant b…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos