Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C Crosser
  6. : Resetting the service light on the Citroen C-Crosser.

Citroen C Crosser - Video tutorial

Model: Citroen C Crosser MK 1 - Years 2007-2012
Part: Checks and maintenance
Operation: Resetting the service light on the Citroen C-Crosser.

Today we will see the instructions that will explain the procedure for resetting the service light for the regular maintenance of the engine oil change for the Citroen C-Crosser. First of all, we get into the car and start the instrument panel; then we go to the settings of the on-board computer until we reach the service one (maintenance key), as shown in the video. At this point, we hold down the button until the service is completely reset (the light will flash until it is completely reset); finally, we turn off the instrument panel and start the engine.


Posted on 4 May 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos