Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the door panel of the Citroen C5

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Door trim panel

Removing the door panel of the Citroen C5 is a very simple operation to perform independently. To perform this operation, we must open the indicated door and then remove the central handle, inserting a flat-tip screwdriver and removing the handle. Unscrew the central screw and remove the window switch panel. Unscrew the bottom and side screws and then release the door panel. Disconnect the central connector and remove the panel completely. Once the necessary maintenance is finished, we can reinsert the panel by following the reverse procedure.

Posted on 16 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front door panel of the Citroen C5
Disassembly of the front door panel of the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) This short and simple procedure will show us how to disassemble and replace the front door panel of the Citroen C5. First, we open the front door of …
Guide to replacing the interior door handle of the Citroen C5
Guide to replacing the interior door handle of the Citroen C5
Citroen C5 (2000-2008 / DC, MK 1) Today we will see the instructions that will allow us to disassemble and replace the internal handle of the front door of the Citroen C5. First, we o…
How to remove the door panel and window lift motor of the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) Below we will see the main steps that will allow us to disassemble and replace the front door panel and the window motor of the Citroen C5. First of …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos