Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port of the Citroen C4 2016 located?

Model: Citroen C4 MK 2 - Years 2010-2018
Part: Dashboard

Thanks to the following guide, you will finally be able to locate the OBD port located inside your 2016 Citroen C4 in a few seconds. Once found, you can finally use it to connect any compatible diagnostic tool and identify any errors in the control unit. First of all, you need to go inside your Citroen C4, then make sure it is completely turned off and open the glove compartment located on the passenger side. At this point, remove the plastic cover located on the side of the compartment and locate the OBD port you were looking for.

Posted on 22 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Citroen C4 located?
Where is the OBD port of the Citroen C4 located?
Citroen C4 (2020-2026 / MK 3) Knowing the exact location of the OBD port of your Citroen C4 Mk3 (latest model) is very important especially if you want to connect a diagnostic too…
Where is the OBD port located on the 2011 Citroen C4?
Where is the OBD port located on the 2011 Citroen C4?
Citroen C4 (2010-2018 / MK 2) If you have a 2011 Citroen C4 and want to find out where the OBD port is located, just pay attention to the following steps and apply them in the ord…
Where is the OBD port of the Citroen C4 located?
Where is the OBD port of the Citroen C4 located?
Citroen C4 (2010-2018 / MK 2) If you don't know where the OBD port of your second-generation Citroen C4 is located, you can follow the procedure described below to find it in just…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos