Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Lights on a Citroen C4

Model: Citroen C4 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: License plate light

See other generations:
Video tutorial

These brief steps will show you how to remove and replace the number plate bulbs on a Citroen C4, following the instructions below. First, move to the rear of the vehicle and open the boot; then, lever off the side of the plastic housing of the number plate light to remove it, as shown in the video.

At this point, pull out the old faulty bulb and replace it with the new one (with the same fitting); insert it and refit the plastic housing of the number plate light until it clicks into place!


Updated on 7 October 2026 by ScegliAuto


Related tutorials

How to turn on the rear fog lights of the Citroen C4 Cactus.
How to turn on the rear fog lights of the Citroen C4 Cactus.
Citroen C4 (2014-2020 / Cactus) Shortly we will see the instructions that allow us to access the rear fog lights of the Citroen C4 Cactus. First of all, we get on board the car and …
How to Change the Battery of the Citroen C4 HDI
How to Change the Battery of the Citroen C4 HDI
Citroen C4 (2004-2010 / MK 1) In this video, learn how to change the battery of the Citroen C4 HDI: ensure the vehicle is off and open the bonnet. The battery is located on the ri…
Removing the Rear Bumper of the Citroen C4
Removing the Rear Bumper of the Citroen C4
Citroen C4 (2004-2010 / MK 1) This video shows how to remove and replace the rear bumper of the Citroen C4, following the instructions below. First, open the bonnet and start by u…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos