Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery of the Citroen C4 HDI

Model: Citroen C4 MK 1 - Years 2004-2010
Part: Battery

In this video, learn how to change the battery of the Citroen C4 HDI: ensure the vehicle is off and open the bonnet. The battery is located on the right side of the engine compartment. Use a socket spanner to unscrew the battery support plate. Disconnect the negative terminal, keeping the connector as far away from the battery as possible; then do the same with the positive terminal. Now you can remove the battery. Clean any corrosion from the terminals with sandpaper. Next, take the new battery and apply copper grease to the terminals. Place it in position; reconnect the negative terminal first, then the positive, replace the support plate, and the job is done.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Citroen C4 1.6 HDI
How to replace the battery of the Citroen C4 1.6 HDI
Citroen C4 (2004-2010 / MK 1) In a few simple steps, we will see the process of disassembling and replacing the battery of the Citroen C4 1.6 HDI. First, open the hood of the car …
How to Replace the Battery on the Citroen C4 1.6 HDI
How to Replace the Battery on the Citroen C4 1.6 HDI
Citroen C4 (2010-2018 / MK 2) The following information will illustrate how to remove and replace the battery of the Citroen C4 1.6 HDI in simple steps. First, open the bonnet of …
How to Replace the Diesel Filter on a Citroen C4 2.0 HDI
How to Replace the Diesel Filter on a Citroen C4 2.0 HDI
Citroen C4 (2004-2010 / MK 1) Today's instructions will show you how to remove and replace the diesel filter on a Citroen C4 2.0 HDI in simple steps. First, open the bonnet of the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos