Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the driver's airbag in the Citroen C3 SC

Model: Citroen C3 SC - Years 2009-2016
Part: Airbag

To remove the driver's airbag block from the Citroen C3 steering column, we need to equip ourselves with a flathead screwdriver, position ourselves in front of the steering wheel, insert the screwdriver, with the blade placed vertically, into the hole under the lower steering wheel spoke and release the pin from the spring that locks it. Repeat the same operation with the other two holes located at the top behind the other spokes, making sure the pins remain released. We can then separate the airbag block from the steering column, disconnect the two electrical connectors in order to remove it permanently.

Posted on 3 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the steering wheel airbag of the Citroen C3
How to remove the steering wheel airbag of the Citroen C3
Citroen C3 (2009-2016 / SC) The removal of the airbag on the 2014 Citroen C3 car follows a few quick and easy steps to be done independently. We start by disconnecting the batte…
How to remove the steering wheel airbag on the 2014 Citroen C3
How to remove the steering wheel airbag on the 2014 Citroen C3
Citroen C3 (2009-2016 / SC) The removal of the driver's airbag located inside the steering wheel is the same on all Citroen C3 vehicles. Even on 2014 models, to remove it we mus…
How do you deactivate the driver's side airbag in the Citroen C3?
How do you deactivate the driver's side airbag in the Citroen C3?
Citroen C3 (2009-2016 / SC) The deactivation of the driver's side airbag and any airbag in general should only occur if strictly necessary, for example in case of malfunctions a…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos