Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C5
    4. : How to disassemble the remote control of the Citroen C5 battery

Citroen C5 - Video tutorial

Model: Citroen C5 DC, MK 1 - Years 2000-2008
Part: Battery
Operation: How to disassemble the remote control of the Citroen C5 battery

Let's see in this video how to replace the remote control battery of a Citroen C5. We take a screwdriver and go to pry in the middle of the two covers, lift the upper cover where the opening and closing buttons are positioned. The battery housing is located under the motherboard, remove it with a screwdriver and mount a new one. Once the aforementioned operation has been carried out, we reassemble the card with the relative rubber buttons, finally close the two remote control covers by pressing one against the other. We test the correct functioning of the remote control.


Posted on 2 October 2023 by ScegliAuto

    Frequently Asked Questions

    • C5 2008-2017 - How much does it cost to replace the battery in the Citroen C5? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos