Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Hydraulic Struts on the Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Hydraulic pistons

Video tutorial

The steps illustrated in this guide will show you how to remove and replace the hydraulic struts on the Citroen Xsara Picasso. First, open the boot's rear hatch and start detaching and removing the strut from the top by prying the sides with something thin and sharp; then detach the clip located at the base of the strut to remove it, as shown in the video.

At this point, perform the same operation on the other hydraulic strut, installing the new original ones; secure them properly and check their correct operation!


Updated on 15 October 2026 by ScegliAuto


Related tutorials

How to replace the air filter of the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Replacing the air filter on a Citroen Xsara Picasso is a simple and quick operation to do independently. To replace the filter, we need to open the f…
How to Replace the Gas Struts on a Citroen Xsara Picasso
How to Replace the Gas Struts on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this video, you will learn how to replace the gas struts on the tailgate of a Citroen Xsara Picasso. You will need a couple of screwdrivers to com…
How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos