Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located in the Citroen Berlingo van?

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Checks and maintenance

In this video we can see where the OBD port is located in the Citroen Berlingo, useful for example in case we need to read the errors recorded by the ECU. As shown, the diagnostic port is located inside the cabin, specifically in the lower area of the dashboard on the driver's side. To access it, simply open the cover of the fuse box, and then remove the panel located to its right. Before connecting a scanner to the port, make sure that the wiring is in good condition, otherwise we could damage the ECU.

Posted on 13 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Citroen Berlingo located?
Where is the OBD port of the Citroen Berlingo located?
Citroen Berlingo (2008-2018 / MK 2) Inside the Citroen Berlingo model produced from 2008 to 2015, there is an OBD socket. The task of the OBD socket is to facilitate communication betwe…
Where is the OBD port located in the Citroen Berlingo?
Where is the OBD port located in the Citroen Berlingo?
Citroen Berlingo (2008-2018 / MK 2) The diagnostic port or OBD port on a Citroen Berlingo vehicle is located under the left dashboard vent next to the steering wheel. To access the port…
Where is the OBD Port on the Citroen Berlingo 2?
Where is the OBD Port on the Citroen Berlingo 2?
Citroen Berlingo (2008-2018 / MK 2) If you are not yet familiar with the location of the OBD port on your Citroen Berlingo second generation (2008-2018), do not worry as you can follow …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos